Electrical Panel & Service Upgrades
Electrical Panel & Service Upgrades in Cicero, NY
Most homes built before 2015 were fitted with 100-amp service, while today's standard is 200 amps for good reason. JA ELECTRIC 315 upgrades panels and service capacity across Cicero, NY, replacing overloaded, outdated, or unsafe panels and stepping service up so your home can carry modern appliances, chargers, and additions. Every upgrade includes a load calculation, correct breaker sizing, proper grounding, and the permits and inspection that keep the work compliant and your property protected for years to come.
AN OLD PANEL IS A CEILING AND A HAZARD.
A tired electrical panel does two things at once: it caps what your home can safely power, and it quietly raises the risk of overheating, arcing, and fire. Loose bus connections, rusted interiors, and obsolete breakers do not fix themselves. Replacing the panel clears both problems at the same time.
We assess the panel, the incoming service, and your real and future load, then recommend the right capacity instead of the biggest number, so you pay for the headroom you will actually use.
✓ 100- to 200-amp service upgrades
✓ Panel replacements and rebuilds
✓ Load calculations and rebalancing
✓ Permits and inspection handled
PANEL & SERVICE UPGRADES
CAPACITY THAT KEEPS UP WITH YOUR PROPERTY.
Every new appliance, charger, and addition draws from the same panel, and older Cicero, NY homes run out of room fast. We upgrade service and panels so the whole system has margin to spare, moving homes from crowded 100-amp boxes to modern 200-amp service, replacing fuse boxes and recalled panels, and rebalancing circuits so nothing sits overloaded. The result is a home that stops fighting its own electrical limits every time you plug something in.
RIGHT-SIZED FOR YOUR HOME, NOT GENERIC.
There is no single correct panel for every property, so we do not guess. We run a real load calculation based on your square footage, appliances, heating, and planned additions like an EV charger or hot tub, then size the service and panel to match. That approach avoids paying for capacity you will never touch while making sure the upgrade leaves genuine room for whatever your Cicero, NY home adds next.
18 YEARS OF PANELS DONE TO CODE.
Panel and service work is where shortcuts hide, and where they do the most damage. Over 18 years we have replaced enough failing and improperly wired panels to know exactly what an inspector looks for and what a safe installation demands. We torque connections to spec, ground and bond correctly, label every circuit, and coordinate the utility disconnect and inspection so the finished panel is not just powered up, it is provably safe and fully documented.
WHAT A RIGHT-SIZED PANEL DELIVERS.
Room To Grow
A modern 200-amp panel leaves open slots and real capacity, so adding a charger, hot tub, or addition later becomes a simple circuit instead of a second, costly service upgrade down the road.
Lower Fire Risk
Fresh breakers, tight connections, and a sound enclosure remove the overheating and arcing hazards that aging panels develop, protecting the home from one of the most common and preventable causes of electrical fire.
Steadier Whole-Home Power
Balanced circuits and adequate service stop the dimming and nuisance trips that come from an overloaded box, giving lighting, electronics, and appliances the clean, consistent power they are designed to run on.
Insurance And Sale Ready
Recalled and obsolete panels raise flags with insurers and buyers alike. A documented, code-current upgrade clears those objections and makes the property easier to insure, sell, and pass through inspection.
Support For Big Additions
Heat pumps, EV chargers, and hot tubs all demand serious capacity. A right-sized service makes these additions possible and safe instead of forcing the panel past its limits the moment they switch on.
Confidence In The Core
The panel is the heart of the electrical system. Knowing it is correctly sized, properly grounded, and clearly labeled brings peace of mind that reaches every circuit and outlet in the building.
WHAT WE UPGRADE
OUR PANEL & SERVICE UPGRADE WORK
From a straightforward panel swap to a full service increase, these are the upgrades we perform across Cicero, NY, each one calculated, permitted, and installed so the core of your electrical system is safe and future-ready.
PANEL SWAP
Panel Replacement
We replace worn, damaged, or obsolete panels with modern breaker panels, transferring circuits cleanly, correcting any hazards we find, and leaving a properly labeled enclosure that is safe to work in and easy to understand.
SERVICE INCREASE
100- to 200-Amp Upgrades
The most common upgrade we do increases service from 100 to 200 amps, coordinating the utility disconnect and reconnect so your home gains the capacity that today's appliances, heating, and chargers genuinely require.
FUSE BOX
Fuse Box Conversions
Homes still running fuses are living on borrowed time. We convert fuse boxes to breaker panels, restoring reliable overload protection and bringing outdated systems in line with current safety standards and code.
RECALLED PANELS
Unsafe Panel Replacement
Certain older panels, including known problem brands, fail to trip reliably and are widely considered fire risks. We identify and replace these units with dependable modern equipment that protects your home the way a panel should.
SUBPANELS
Subpanel Installation
When a garage, workshop, addition, or finished basement needs its own group of circuits, we install a properly fed subpanel, extending capacity to that area cleanly without overloading the main panel or crowding it with new breakers.
LOAD BALANCING
Load Calculations & Balancing
Before and during an upgrade, we calculate the true demand and distribute circuits so no single leg or breaker is overworked, eliminating the trips and hot spots that an unbalanced, crowded panel creates.
THE WORD ON OUR WORK
WHAT OUR CLIENTS SAY.
Clients across Cicero, NY tell us their upgraded panel finally matches their home, no more tripping when the dryer and microwave run together, no more worry about the rusted box in the basement. They notice the tidy labeling, the clean install, and an inspection that passed without a hitch.
Common Questions
FREQUENTLY ASKED QUESTIONS.
More of what homeowners ask before an upgrade, from timing and power outages to permits and panel safety, answered directly so you know what to expect before the work begins.
How long does an electrical panel upgrade take?
The hands-on panel work usually takes four to eight hours, during which power is off. The full project can span one to three weeks once permit processing and utility coordination are included, most of which happens before installation day.
Will my power be off during the upgrade?
Yes, for the working portion. Power must be shut off while we replace the panel, typically for a single workday. We plan the timing with you and coordinate the utility disconnect so the outage is contained and predictable.
Do I need a permit and utility coordination for a service upgrade?
Almost always. Service and panel upgrades require a permit and inspection, and increasing service means the utility must disconnect and reconnect the main line. We handle both so the work is legal, safe, and properly signed off.
Should I upgrade to 200-amp service even if 100 amps works now?
Often it is worth it. If you plan to add a charger, heat pump, hot tub, or addition, 200-amp service provides the headroom. JA ELECTRIC 315 runs a load calculation for your Cicero, NY home before recommending a size.
What is a subpanel and when do I need one?
A subpanel is a smaller panel fed from the main one that serves a specific area, like a garage or addition. It adds circuit space and local convenience without overcrowding the main panel or requiring a full service increase.
Are older Federal Pacific or Zinsco panels really unsafe?
These panels have a documented history of breakers that fail to trip during a fault, which is a genuine fire concern. Replacing them with modern equipment is one of the most worthwhile safety upgrades an older home can make.
Can you relocate my electrical panel?
Yes. Panels can be moved for finished basements, remodels, or code clearance requirements. Relocation involves extending or rerouting service conductors and coordinating inspection, so we assess the layout and give you a clear plan and estimate first.
Why choose JA ELECTRIC 315 for panel and service upgrades?
Because we size the upgrade to your needs and install it to pass inspection the first time. With 18 years of panel work across Cicero, NY, we make the core of your system safe, documented, and future-ready.
HOW WE WORK
FROM UNDERSIZED TO UPGRADED, HERE IS HOW.
STEP 01
Assess The System
We inspect your existing panel, service size, and wiring, then talk through your current problems and future plans. This tells us whether a panel swap, a service increase, or a subpanel is the right and safe solution.
STEP 02
Calculate The Load
Using your square footage, appliances, heating, and planned additions, we run a proper load calculation. The number drives the right service size, so you get genuine headroom without paying for capacity your home will never draw.
STEP 03
Estimate And Permit
You receive a clear, itemized estimate, and once approved we pull the permit and schedule the utility disconnect. Coordinating these steps up front keeps installation day on track and the whole project moving toward a clean inspection.
STEP 04
Install The Upgrade
On installation day we shut off power, remove the old panel, and install the new one, transferring circuits, torquing connections to spec, and grounding and bonding correctly so the finished system is safe and built to last.
STEP 05
Test And Label
We restore power, test every circuit, verify grounding and breaker function, and label the panel clearly. You end up with a system that is confirmed safe and easy for any future electrician to read.
STEP 06
Inspect And Hand Off
We see the required inspection through to sign-off, hand over your documentation, and walk you through the new panel. The upgrade is finished, compliant, and ready to carry your home for years to come.
GET YOUR FREE ESTIMATE
GET YOUR PANEL UPGRADE QUOTE, FREE.
If your panel trips, buzzes, or simply cannot keep up, the fix starts with a clear plan. Tell us about your Cicero, NY home, and JA ELECTRIC 315 will assess the system and send a straightforward upgrade estimate.
WHAT YOUR UPGRADE QUOTE COVERS:
✓ A full look at your panel and service
✓ A real load calculation for your home
✓ The right capacity recommendation
✓ Permits and utility coordination
✓ A clear, itemized written price
✓ Code-compliant, inspected installation